Meet News Knitter. It’s described as: “… a data visualization project which focuses on knitted garments as an alternative medium to visualize large scale data.” The sweaters are all designed pulling in feeds from Google News and a few other…
I threw together a couple of simple geometric models this weekend on the laser. As it happens, one nested nicely within the other. DXFs after the cut.
Hey folks, here’s the long of the short of it, Bre Pettis has a pilot of his very own TV show coming out!! Whether his show will air for a whole season depends on the Neilsen ratings, which is the…
Sparkfun just launched the Arduino Pro Mini for $19… it’s tiny, and cheap, and been in the works for a long time. Here’s their description: It’s blue! It’s thin (0.8mm)! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to…
A few weeks ago I taught a cupcake hacking class. This class was primarily based on how to electrify your cake without poisoning your friends. The first rule of thumb is to use lead-free solder. We all know soldering with…
Bill picked up an optivisor for the space, and attached an LED lighting enhancement. My SMT sequin work just got a googolplex times easier. Picture of the optivisor in action after the jump
A few of the Resistors were on the rooftop discussing life, the universe, and everything. Nick went a little higher to find the answers. I know who’s going to install the repeater antenna when NYCR’s radio station goes live. 😉
I’m learning QCAD and there is a bit of a learning curve. Got any tips or tricks? Leave ’em in the comments! More tutorials – Link
Make:NYC was once again hosted at NYC Resistor. This event is a free event open to all… with one requirement. People who show up are expected to get their hands dirty and make things. At the last meeting we had…