We’re at the end of our 2 year lease at NYCResistor. We’ve grown out of our space. Classes are almost always full, the heat isn’t on on the weekends, and the walls are stacked high with projects. It’s been time to move for a while and now it’s official. We’ve signed the papers and given notice and we’re moving to an awesome new space.

The new space is really awesome. It’s about 10 blocks away from our current location and two blocks from the Atlantic Street station which is convenient for pretty much every train ever. It is almost 3x the space with two main rooms and a bunch of smaller rooms. There is a place for a kitchen although there is no kitchen in that place. We will have our own bathroom. The laser gets its own room. There is a loft already there and an archway. There is a stage with lots of room for presentations and probably an audience of 100-150. The ceilings are tin. There will be more room for more awesome.

The downsides are that there is no passenger elevator (only a very old freight elevator) and that the space needs a lot of work to get to be the cozy space we want it to be. There aren’t concrete floors like our current space, but there is a fire escape and sprinklers in the event of an emergency which is an upgrade from our current space. We get to control the heat, but we have to pay for it.

We’re excited about the possibilities and freaked out by the amount of money it is going to cost us to move so stay tuned for a fund-raising post. Over all, we’re thrilled to make more space for more hacking in 2010! We have to be out of our current place by the first of March, so expect the last two weeks of February to be a little busy in terms of our schedule. If you’ve got questions, drop them in the comments and we’ll try and answer them!

Mitch Altman is in town next, and will be giving one of his famous workshops at NYC Resistor. Mitch has taught thousands of people to solder and make cool things with microcontrollers at his workshops at hacker spaces and hacker conferences and schools almost everywhere. He can teach you, too, if you like.

If you have ever had any curiosity about making something with electronics, then please join us. Anyone and everyone can learn to make cool things. And it’s fun. And easy! You can learn to make something cool with electronics in one workshop, and take your cool project home with you!

*What*: Make Cool Things With Microcontrollers! workshop.
*Where*: NYC Resistor, 397 Bridge Street, 5th Floor.
*When*: 8pm, 29-January, Friday. (It is totally OK to come late.) Stay as little or as long as you like. Most projects take about 1 to 2 hours.
*Who*: It is fun to make things in the friendly community of NYC Resistor. Come join us. All skill levels. 18 years old and up. Everyone is welcome.
*Cost*: Instruction is Free! If you use any kits, reimbursment for kit price is requested ($10 to $20, depending on kit). There will be plenty of cool kits available to build, including:

TV-B-Gone (turn off TVs in public places!)
Brain Machine (Meditate, Hallucinate, and Trip Out!)
LEDcube (cool cube of blinky lights!)
Mignonette Game (play fun games!)
Trippy RGB Waves (interactive colored blinky lights!)
MiniPOV (more cool blinky lights!)
MintyBoost (charge your USB enabled gadgets!)

and for the more advanced:
microcontroller programmers (program all your AVR family chips!), Arduino clones (make just about anything!), and more.

More info on most of most of these projects is available on Mitch’s website: http://www.CornfieldElectronics.com (click on the “maker faire” tab). If you have your own project, please bring it by and make it with us in the friendly community of NYC Resistor.

Mitch is the brains behind Cornfield Electronics, and one of the co-founders of Noisebridge hackerspace in San Francisco. Mitch is best known as the inventor of TV-B-Gone, but his list of great hacks and cool electronics includes a lot of other great projects. When he is not at Noisebridge building awesome and amazing things, he is on the road from hackerspace to Hacker-Con and back again, sharing his love of electronics.

I wanted to see what would happen if I put a ceramic (stoneware) dish under the lazzzor. I started with the settings for etching glass, but the laser handbook only recommends raster settings, and I wanted to try vector engraving as well, so I tried a bunch of variations.

In the above image, I rubbed a bit of pencil graphite into the engravings to make them more visible. My favorite vector setting was 100% speed, 50% power (on the 35W Epilog). Slower speed or more power raised an ugly lumpy bead of molten glaze, but 100/50 gave a nice smooth scratch.

For my raster test (lower left in the image), I used the recommended settings for glass at 600dpi: 35% speed, 10% power. It looked just fine so I didn’t try any other settings.

I thought maybe I could melt through the colored glaze to reveal the white ceramic underneath, but that didn’t work.

The zigzag line in the above image was engraved at 75% speed/100% power, and the straight line at 14/100. Neither was able to make a white line through the blue glaze. I was afraid to go any slower, because there was already quite a lot of heat building up. Also, I’m thinking of doing this in bulk to a lot of dishes, so I’m ruling out any technique that goes slowly (and thus costs more).

Courtesy Zach Hoeken's Flickr Stream. CC'ed

Every tech blog on the planet is covering CES. I’m not. I don’t get to spend a week in vegas hanging out and seeing the new technologies. I have to go to work. I cry, and sometimes I wonder what the whole point of it all is. But, at least some of our members aren’t confined to this special weekday hell that I am.

Makerbot Industries, co-founded by three of our members is manning a booth at CES!

I hear a lot of the technology this year is related to 3D. I guess a 3D printer is right up their alley. Personally, I’ve been pretty turned off to the whole 3D thing since Zaxxon. But, I try not to judge.

Also I heard there was some form of polar bear television on display there. Not sure why they’d want to encase a visual display device in the horrific visage of one of the worlds most infamous killing machines. I guess I’m just not up on what people want out of their electronics these days.

The crew from Vice’s Motherboard.tv came out to talk with us a bit about the Hackerspace and DIY movements, and has put up their video today. Thanks to Alex and the rest of the crew, the video turned out great!